Component Of Injection Molding Machine
When it comes to injection molding machine, many friends actually know, but if you want to ask the structure of the equipment, I believe there will be many friends do not know very well, the excellent effect of injection molding machine is also closely related to its structure, so the following Guangdong Liansheng injection molding machine manufacturer to explain the structure of the equipment, I hope you have a more profound understanding of the injection molding machine.Component Of Injection Molding Machine
1. Injection system
Injection system is one of the important parts of injection molding machine. There are three main forms: plunger, screw, and preformed plunger injection. The screw type is widely used at present. Its function is in a circulating injection molding machine, injection molding machine manufacturers can in a specified time to heat and plasticize a specific plastic, under a specific pressure and speed, through the screw to melt the plastic injection cavity.
2. Mold closing system
Function of mold closing system: The function of mold closing system of injection molding machine is to ensure the product of mold closing, mold opening and ejection. At the same time, after the mold is closed, the mold has enough clamping force to resist the pressure caused by the molten plastic entering the mold cavity, so as to prevent the mold from opening and causing the bad state of the product. Mold closing system composition: The mold closing system is mainly composed of mold closing device, mold adjusting mechanism, ejector mechanism, front and rear fixed template, moving template, mold closing cylinder and safety protection mechanism.
3. Hydraulic system
The role of hydraulic transmission system is to provide power for injection molding machine according to the various actions needed in the process of injection molding, in order to meet the pressure, speed, temperature and other requirements of injection molding machine parts. It is mainly composed of various hydraulic components and hydraulic auxiliary components, among which oil pump and motor is the power source of injection molding machine. A variety of valves control oil pressure and flow to meet the requirements of the injection process.
4. Electrical control system
Electronic control system and hydraulic system coordination reasonable, can achieve the injection molding machine manufacturers process requirements (pressure, temperature, speed, time) and various procedures. It is mainly composed of electrical appliances, electronic components, instruments, heaters, sensors and so on. Generally there are manual, semi-automatic, automatic, adjustment of four control modes.
The above is about the four components of the injection molding machine to share this, I believe we all have a deeper understanding of this equipment, if you are not clear, you can call us or directly send us a message, we will reply in time.
